Trend Universal Router Sub Base UNIBASE

Trend Universal Router Sub Base UNIBASE

  • £18.00


 The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes

Will fit directly to most routers

Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base

Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch

Instructions for fitting

The line-up pin fit into the collet and is plunged through the router base The line-up bush is fitted into the Unibase and secured - this is then placed over the line-up pin and rotated in order to line up the fixing holes - the Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes and these range from 10mm up to 30mm (GB10 - GB32) - for larger diameter cutters a 40mm guide bush (GB40) is available

Supplied with

2 x Line-up pins

1 x Guide bush

1 x Fixing screw pack

 

 


We Also Recommend