Trend Lock Jig LOCK JIG

Trend Lock Jig LOCK JIG

  • £106.90


The trend lock jig makes the machining of mortice locks quick simple and accurate for both the professonal tradesman and the diy enthusiast.The Trend corner chisel is a good addition to both this jig and the hinge jig. 

This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks.

For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1inch face-plate.

Deeper mortises can be achieved with a suitable size of auger bit.

Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.

Steel plates & body.

The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter.

 Supplied with

1 x Guide Bush Collar

12 x Face Plate Templates

4 x Mortise Templates

6 x Spacer Fingers

 

  Specifications  
Includes templates for locks having the following face-plate dimensions:
Imperial (Metric) Template
7/8"x 1/8" (22.2x156 mm) 1
7/8"x 6 " (22.5x152.5 mm) 2
1"x 4 3/4" (25.4x121 mm) 3
1"x 5" (25.4x127.5 mm) 4
1"x 5 1/4" (25.4x133.5 mm) 5
1"x 5 3/4" (25.4x145 mm) 6
1"x 6" (25.4x153 mm) 7
1"x 6" (25.4x156.5 mm) 8
1"x 6 1/2" (25.4x165.5 mm) 9
1"x 7" (25.4x177 mm) 10
1"x 2 1/4" (25x57.5 mm) 11 UPPER
1"x 2 1/4" (26x56.5 mm) 11 LOWER
1"x 6 3/8" (25.6x162mm 12
Mortise Dimensions
Imperial (Metric) Template
5/8" x 2 7/8" (16x72 mm*+) A
5/8" x 4 1/4" (16x107 mm*) B
3/4" x 3 1/8" (19x78 mm*) C
3/4" x 4 1/4" (19x109 mm*) D
*These are maximum mortise length, unless radius ends are squared with a chisel.
+Note:actual size of mortise 16x79 mm (5/8" x 3 7/64")

We Also Recommend