Trends one piece contractors hinge jig Hinge jig
Trends one piece contractors hinge jig (ROUTER NOT INCLUDED)
The Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames.
It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
Used on-site & in joinery shops to increase productivity with excellent results.
Four apertures for fire door requirements.
No need for marking out in the conventional way.
Quick & simple to set-up as the hinge is used as the pattern.
Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
Use with a light duty plunge router with 1/4 inch collet.
Long reach router cutter required, 12mm diameter with 70mm overall length.
Angled position slots to prevent creep.
Unibase may be needed.
Patent No. GB2285410.
T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.
4 x Apertures
2 x Bradawls with spacer
1 x 16mm guide bush
1 x T-Handle hex key
1 x 4mm spacing gauge
1 x Plastic storage tube
Hinge sizes possible
|Length min.||2 5/8" (67 mm)|
|Length max.||5" (127 mm)|
|Width min.||3/8" (9.5 mm)|
|Width max.||1 3/8" (35 mm)|
|Door sizes possible|
|Height min.||6' 5" (1955 mm)|
|Height max.||6' 10" (2100 mm)*|
|Thickness min.||5/8" (16 mm)|
|* Please note for doors over 2040mm the bottom hinge will be higher than 9" up.|